guidelines_for_body_modders_and_spaces

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

guidelines_for_body_modders_and_spaces [2026/09/06 01:30] – created cyberlassguidelines_for_body_modders_and_spaces [2026/09/06 01:54] (current) cyberlass
Line 1: Line 1:
 +====== Cyborg Body Mod Guidelines ======
 +
 +
 +===== The Space =====
 +
 +All mods should take place in as sterile an environment as possible. The room should be cleaned with an industrial-grade detergent and then disinfectant. Care should be taken to sterilize any surface that is used for the mod, before before and after.  
 +
 +===== The Tools =====
 +
 +All tools should be sterile. Either as a sealed, single use item or a properly sterilized item. Sterlization would include cleaning with an industrial-grade detergent and/or run through an ultrasonic cleaner, drying and autoclaving in sterilization pouches with color-changing indicator strips. For proper sterilization use a Class B or medical-grade steam sterilizer which uses high pressure and temperatures over 250°F (121°C) to kill all bacteria, viruses, and spores. 
 +
 +
 +===== The Modder =====
 +
 +Anyone performing a body mod should ensure their space and tools are ready. They should not be under the influence of any recreational substances. 
 +
 +The modder should explain the procedure in clear language and obtain verbal consent that the person getting the mod understands:
 +
 +* what the mod does
 +* what are the risks of having the mod
 +* what technique will be used and if it is a new technique
 +* what aftercare is required
 +* what to look for if the mod is being rejected
 +
 +If it strongly encouraged to provide written aftercare instructions. 
 +
 +The modder should ask the person getting the procedure
 +
 +* if they have any medical conditions that would a problem
 +* if they have had any reactions to piercings or body mods in the past
 +* if they are under the influence -- and refuse to continue if there are
 +* to explain what mod they are getting and what aftercare they will be doing
 +* if they have any concerns about the mod
 +
 +
 +===== The Procedure =====
 +
 +The body modder should lay down a sterilize field (a blue sterile drape most commonly). The body modder should have all required and expected safety gear on and sterilized tools ready. 
 +
 +After the procedure, all used items should appropriately be disposed of or cleaned and sterilized. The working surfaced must be steralized.
 +
  
-====== Headline Level 1 ====== 
-===== Headline Level 2 ===== 
-==== Headline Level 3 ==== 
-=== Headline Level 4 === 
-== Headline Level 5 == 
  • guidelines_for_body_modders_and_spaces.txt
  • Last modified: 2026/09/06 01:54
  • by cyberlass